Click picture to enlarge
Technical Specifications
* Power: AC 220V ± 10% / 50Hz
AC 110V ± 10% / 60Hz
* Power consumption: <12W
* Air Source: Max 0.99MPa (water-free dry clean air)
* dispensing pressure adjustment range: 0.05 ~ 0.99MPa
* Function mode: Manual mode and set the mode of 16 free
* dispense time adjustment range: 0.01 ~ 99.99S
* Dispensing Time Display: Four LED display, can easily spit out the amount of fine-tuning
* dispense time adjustment range: 0.01 ~ 99.99S
* dispensing interval adjustment range: 0.1 ~ 9.9S
* vacuum suction function: adjustable to 600 mm Hg negative pressure control
* Repeatability: ± 0.01%
* dispensing frequency: more than 1000 times / min
* Minimum dispensing volume: 0.0001ml
* Dimensions: 235mm × 225mm × 63mm
* Weight: <3 kg
Use of the machine:
Vinyl, paint, lubricants, solder paste, silver paste, ink, mud oil resistance, SMT red plastic, silicone paper, UV glue, quick dry rubber, chemical reagents, Crystal, epoxy resin, yellow plastic, glass, plastic, Grease, horn plastic, wear plastic, plastic screws, magnetic fluid electrolyte, flux, alcohol, marking paint, water, silicone
Manual Dispensing
