Click picture to enlarge
◎ needle dispensing operation and development of the programming model, allows the operator to easily handle complex trace dispensing regulations.
◎ integrate a variety of environments such as point of dispensing glue, glue line, arc line of glue.
◎ manufacturing high-strength material to make the machine run more stable.
High-intensity device body, so that the vertical high XYZ
One body with CNC machining equipment, effectively ensuring the verticality of XYZ, to improve the machining precision of the equipment.
Single machine can operate, easiest to install
JH-300D No need to stand-alone operation with an external computer. Not only facilitate the installation, operation set is simple.
Box allows you to teach humanity to complete the process easy to set
Graphic Design with the teaching of key box, allowing you to easily set your fingertips to complete any dispensing path settings. Can complete a variety of paths of the matrix of simple reproduction, offset modification, correction point setting ... ... and the program transmission between machines and other work can be powerful.
The only 3D arc quite make the control system PC-BASE
Well-developed control card to JH-300D into a truly three-axis circular interpolation PTP and CP equipment, so you can use it for any non-plane 3D dispensing path.
Demand for various types of dispensing industry
The most commonly UV plastic, silicon, EPOXY, red plastic, silver plastic, AB glue, COB vinyl, conductive adhesive, heat aluminum paste, instant glue ... ... and so dispensing.
Common application areas are:
◎ ◎ PCB semiconductor packages and electronic components fixed protection ◎ LCD glass board packaging board coated adhesive ◎ mobile phone or key speakers dispensing dispensing ◎ ◎ battery dispensing gas mechanical seal ◎ ◎ coated metal parts car parts ◎ then coated quantitative gas, liquid filled chip bonding coating ◎
Model JH-300D
Working range X / Y / Z (mm) 300/300/100
Maximum load Y-AXIS/Z-AXIS 8kg/4kg
Speed (mm / sec) 0.1 ~ 800/350
Repeatability ± 0.01mm/300
Program record mode 100 groups, each 4000 points
Display (can support U disk copy) to teach box LCD (320X240)
Micro-stepping motor system-level Japanese precision motor
Motion mode point to point / continuous line
Transmission belt + precision linear guide
Sports Interpolation 3 aXIS (3D production line can be any body space)
Teach box in edit mode
I / O signal 8 Inputs / 8 Outputs
External Control Interface Rs232
Input power AC110V/220V 300W (internal switch conversion)
Operating temperature 5-40 ℃
Operating humidity 20-90%
Dimensions (WxDxHmm) 480X500X600
Body Weight (kg) 75
◎ integrate a variety of environments such as point of dispensing glue, glue line, arc line of glue.
◎ manufacturing high-strength material to make the machine run more stable.
High-intensity device body, so that the vertical high XYZ
One body with CNC machining equipment, effectively ensuring the verticality of XYZ, to improve the machining precision of the equipment.
Single machine can operate, easiest to install
JH-300D No need to stand-alone operation with an external computer. Not only facilitate the installation, operation set is simple.
Box allows you to teach humanity to complete the process easy to set
Graphic Design with the teaching of key box, allowing you to easily set your fingertips to complete any dispensing path settings. Can complete a variety of paths of the matrix of simple reproduction, offset modification, correction point setting ... ... and the program transmission between machines and other work can be powerful.
The only 3D arc quite make the control system PC-BASE
Well-developed control card to JH-300D into a truly three-axis circular interpolation PTP and CP equipment, so you can use it for any non-plane 3D dispensing path.
Demand for various types of dispensing industry
The most commonly UV plastic, silicon, EPOXY, red plastic, silver plastic, AB glue, COB vinyl, conductive adhesive, heat aluminum paste, instant glue ... ... and so dispensing.
Common application areas are:
◎ ◎ PCB semiconductor packages and electronic components fixed protection ◎ LCD glass board packaging board coated adhesive ◎ mobile phone or key speakers dispensing dispensing ◎ ◎ battery dispensing gas mechanical seal ◎ ◎ coated metal parts car parts ◎ then coated quantitative gas, liquid filled chip bonding coating ◎
Model JH-300D
Working range X / Y / Z (mm) 300/300/100
Maximum load Y-AXIS/Z-AXIS 8kg/4kg
Speed (mm / sec) 0.1 ~ 800/350
Repeatability ± 0.01mm/300
Program record mode 100 groups, each 4000 points
Display (can support U disk copy) to teach box LCD (320X240)
Micro-stepping motor system-level Japanese precision motor
Motion mode point to point / continuous line
Transmission belt + precision linear guide
Sports Interpolation 3 aXIS (3D production line can be any body space)
Teach box in edit mode
I / O signal 8 Inputs / 8 Outputs
External Control Interface Rs232
Input power AC110V/220V 300W (internal switch conversion)
Operating temperature 5-40 ℃
Operating humidity 20-90%
Dimensions (WxDxHmm) 480X500X600
Body Weight (kg) 75
