Click picture to enlarge
Machine configuration
1. Control system: Mitsubishi PLC +7.2 inch touch screen Wei Lun
2. Software system: Chi-Chen independent R & D
3. Stepper motor: Japan YAKO original motor
4. Metering pump: Taiwan TUOLIO
5. As the system: Japan IEI0
6. Mixer: Chen Chi-developed manufacturing
7. Stirring motor: Taiwan OUTAI
8. Frame Material: A3 * 3mm Manufacturing
9. Sliding device: Taiwan TGC
10. Flow Detection: Switzerland TILL
Third, the machine parameters
1. With plastic ratio: 100:5 100:10
2. Travel: X axis 600mm Y axis 700mm Z axis 20mm
3. Kinematic accuracy: ± 0.01mm
4. Speed :0-60m / min
5.A rubber output :0-5L / min
6.B rubber output :0.02-3L / min
7.A rubber output error: ± 0.02ml
8.B rubber output error: ± 0.02ml
9.A plastic measurement error: ± 0.001ml
10.B plastic measurement error: ± 0.001ml
11.B detection alarm delay: 0.1S
12.A Pump output: 9cc / r
13.B Pump output: 1.2cc / r
14. Work efficiency: MAX 10 张 P16/2min (measured)
15. Mixed Mode: Dynamic 600-2000r/min
16. Mixing length: 200mm
17. Automated latex time :0-1000s
18. Automatically reset the time :0-1000s
19. Automated latex Weight :0-500g
20. Program, retained: 100EA
21. Starting power: 300w
22. Normal power: 500w
23. Input air pressure :0.5-0 .7 mpa
24. Supply Voltage: 220V50HZ
25. Weight: About 230kg
26. Machine size: L1150mm * W1100mm * H750mm
LED Pouring Machine
