Click picture to enlarge
Technical parameters and configuration Product Features
1. Features
Strong working table: You can also display 10 P16. And eight strong P10 table, the machine automatically in case of working effectively improve the efficiency and reduce worker fatigue caused by repeated movement.
A solid mechanical structure:
The whole frame is thick solid machine materials, an effective solution to the machine itself in the case of high velocity jitter caused, so to improve the efficiency of a more reliable guarantee.
Quality control system imported from Japan and Taiwan, Wei Lun PLC Mitsubishi 7.2-inch touch screen controls work the machine, user-friendly user interface and stability control system is the best guarantee for the machine; including: advanced parameter storage, blending, AB glue of the actual output and testing.
Stability of the mechanical movement
Japan YAKO A stepper motor drive pump, B Pump, X axis, Y axis. Good solution in the past to bring the speed of AC motor fluctuations, making the machine more stable output
Advanced mechanical pump original pump used in Taiwan, the output error: ± 0.02%
High-precision machine ratio method common to 100:5 to 100:10 to any manufacturer AB glue, and more intuitive with good actual output parameters. More effectively, while the proportion of solid plastic to make up a serious defect is not accurate.
AB glue mixture stirred automatic mechanical automatic mixing device, the mixing length of 200mm, to ensure that the AB glue real mix well. Seriously put an end to the phenomenon of uneven glue dry.
AB glue traffic flow measuring instrumentation control by the Swiss plastic AB actual output, the accuracy of ± 0. 1%, and there is no glue B detection feedback capabilities.
2. Machine configuration
1. Control system: Mitsubishi PLC +7.2 inch touch screen Wei Lun
2. Software system: Chi-Chen independent R & D
3. Stepper motor: Japan YAKO original motor
4. Metering pump: Taiwan TUOLIO
5,. As the system: Japan IEI0
6. Mixer: Chen Chi-developed manufacturing
7. Stirring motor: Taiwan OUTAI
8. Frame Material: A3 * 3mm Manufacturing
9. Sliding device: Taiwan TGC
10. Flow Detection: Switzerland TILL
3. Machine parameters
1. With plastic ratio: 100:10
2. Travel: X axis 600mm Y axis 700mm Z axis 20mm
3. Kinematic accuracy: ± 0.01mm
4. Speed :0-60m / min
5.A rubber output :0-5L / min
6.B rubber output :0.02-3L / min
7.A rubber output error: ± 0.02ml
8.B rubber output error: ± 0.02ml
9.A plastic measurement error: ± 0.001ml
10.B plastic measurement error: ± 0.1ml
11.B detection alarm delay: 0.1S
12.A Pump output: 9cc / r
13.B Pump output: 1.2cc / r
14. Work efficiency: MAX 10 张 P16/2min (measured)
15. Mixed Mode: Dynamic 40000r/min
16. Mixing length: 200mm
17. Automated latex time :0-1000s
18. Automatically reset the time :0-1000s
19. Automated latex Weight :0-500g
20. Program, retained: 100EA
21. Starting power: 300w
22. Normal power: 500w
23. Input air pressure :0.5-0 .7 mpa
24. Supply Voltage: 220V50HZ
25. Weight: About 288kg
26. Machine size: L1150mm * W1100mm * H750mm
Auto LED plastic irrigation
