Click picture to enlarge
| Product Category: conductive plastic / thermal plastic - SZ-150L low power conductive adhesive / low viscosity SZ-150L a high thermal conductivity with high electrical conductivity of the solid crystal plastic, one-component, medium viscosity, room temperature storage for a long time, easy to operate, mainly for low-power LED solid crystal, and semi-automatic device for automatic dispensing point Gel. | ||
| Model | SZ-150L | Test Method |
| Appearance | Silver | Visual |
| Viscosity range | 15000～20000cp | EHD viscometer |
| Chloride Cl- | Ionics （Cl-、Na+） | Ion Chromatography |
| Sodium Na+ | ≤0.8ppm | |
| Tg | 150℃ | TMA |
| Coefficient of thermal expansion | 34.5 | TMA |
| μm/m?k | ||
| Thermal Conductivity | 3.6 | Laser radiation |
| W/m·k | ||
| Volume Resistivity | 0.0001 | Resistance meter |
| ohm?cm | ||
| Cure condition | 150℃ | Blast drying oven |
| 60～90min | ||
| Hardness | 80 | Hardness Tester |
| Die shear strength | ≥8×107 | Thrust Tester |
| (N/m2 ) | ||
| Storage life @ -15℃ | ≥6 months | Detection of the indicators for |
| Fg1. colloid curve of curing time varies with temperature Note: 1. glue in the refrigerated cases, must be warmed to 25 degrees, 30min ~ 45 min later before use; operating time of the product at room temperature for 36 hours; 2. Customers can the actual situation of the oven, the appropriate extension of curing time, curing is not fully there to prevent the phenomenon of off-chip; 3. glue is not used, should be sealed refrigeration, it will lead to larger viscosity, re-use drawing and other phenomena may occur; 4. Do not mix different glue may appear the phenomenon of blocking dispensing syringes. Packing 25g / sticks, 35g / sticks, 200g / box, other packaging is negotiable. | ||
Conductive silver paste special low-power
