Expanding crystal machine
2. Turn the power switch, the temperature set at 55 ℃ (temperature difference between persons of different chip film 5 ℃); 3. The cylinder on the switch to "up" position, the die back to the top, switch to the next cylinder down position, the next die back to the bottom (repeated several times under the cylinder moves, the speed will increase the speed adjusted to fit ) 4. Release the lock, set off on the workpiece plate, first put on the expansion of the inner ring under the crystal on the di
5/9 Next Pre Home page Last page
Back
Refresh
WAP Home
Web version
Login
11/21 19:09